Toyota 4Runner Rear Drive Shaft | Conventional

$415.00
Key product features
  • Uses 1310 series universal joints. These are the most common size of u-joints there is. Replacement joints are much easier to find than stock Toyota-style joints.
  • Shaft uses 2.5″ diameter .083″ or .120″ wall DOM steel tubing. Better quality tubing than stock Toyota shafts use.
  • Built using greaseable Goldseal joints.
  • Includes 8 new 10mm bolts and nuts which may be required at either end of the shaft for installation.
Clear
Flange pattern at transfer case

Flange pattern at differential

tube wall thickness

Flange to Flange Length

Length in inches. 60" maximum

Guaranteed Safe Checkout
Image Safe Checkout
  • Worldwide shipping & Pick-Up and Drop-Off in upper 48 USA states
SKU: TW-T4R-RS Categories: , Tag:

If your Toyota 4Runner is not lifted and you are not experiencing vibrations due to increased angles, this is the shaft for you.
Also a great upgrade for Toyotas that came with a stock drive shaft.
Toyota drive shaft lengths and flange patterns vary. In our experience, there is no single standard length or flange pattern for any particular model.
To ensure that you get the right thing you will need to take a couple of measurements before ordering your drive shaft.
You need to measure the distance from your transfer case flange to your differential flange.
You will also need to measure the bolt pattern at each end. It is important that you measure the bolt pattern on each end because they are often not the same at both ends.

Weight 30 lbs
Make Model Year
Toyota 4Runner