No products in the cart.
All products
Toyota 4Runner Rear Drive Shaft – Double Cardan
$545.00
- Tom Wood’s Custom Drive Shafts.
- Uses 1310 series universal joints. These are the most common size of u-joints there is. Replacement joints are much easier to find than stock Toyota-style joints.
- Shaft uses 2.5″ diameter .083 or .120 wall DOM steel tubing. Better quality tubing than stock Toyota shafts use.
- Built using our greaseable Goldseal joints.
- Includes 8 new 10mm bolts and nuts which may be required at either end of the shaft for installation.
Guaranteed Safe Checkout
- Worldwide shipping & Pick-Up and Drop-Off in upper 48 USA states
Toyota 4Runner Rear Drive Shaft – Double Cardan
This is what you need if your Toyota 4Runner is lifted and you are experiencing vibrations due to increased angles.
Also a great upgrade for Toyotas that came with a stock double cardan drive shaft.
Toyota drive shaft lengths and flange patterns vary. In our experience, there is no single standard length or flange pattern for any particular model.
To ensure that you get the right thing you will need to take a couple of measurements before ordering your drive shaft.
You need to measure the distance from your transfer case flange to your differential flange.
You will also need to measure the bolt pattern at each end. You must measure the bolt pattern on each end because they are often not the same at both ends.
| Weight | 30 lbs |
|---|
| Make | Model | Year |
|---|---|---|
| Toyota | 4Runner |
